| I'm going to look at some of the pics you sent. Haven't been there yet.
It sounds like what would happen if you had a limit switch that had a reset button on it. And if no such thing, then it sounds like a control that does this, is stuck or toasted, say on the board. I'll be back.
I'm back. Is that a fan switch?, a limit switch?, or a combination fan and limit switch?, that is just above the gas valve: That plate with the 2? wires coming out of it. Or are there 4 connections and 4 wires? We need to know conclusively if voltage exists on the outgoing terminal(s) of that switch.
**IF** there is, then I'd say your problem lies with some relay inside that control box, that is in the blower compartment, that has that silver cover on it. Unplug and replug on wires in that box, to make sure they make good contact.
Last edited by ecman51`; 12-29-08 at 06:05 PM. |