| There is no fan toggle switch that I'm aware of. Only and on/off switch for the furnace. I guess a quick test would be to disconnect the fusible link connection and see what happens. And also check the voltage going across the limit switch as you mentioned.
As for whether the inducer vent motor comes on after resetting, I'm not quite sure what that (inducer vent motor) is. All I know is that the blower is on as soon as I flip the power switch and it seems to be bypassing the thermostat control. I'm not quite sure what you mean by resetting, as there is no reset switch. I did remove the limit switch and tapped it to see if that loosened anything, but it didn't change anything. |