Quote:
Originally Posted by dmachobo  Jay - are you still out there? |
Yepper!
Quote:
| I can't find that HUM wire and so currently I have mine wired directly from the 120 power going into my heating unit (ICECO) to the transfomer and then to the humdistat |
Are you using the sail switch, or nothing?
Quote:
| I have a EAC on the motherboard of the HVAC but no wire coming out of it. |
Is it a 1/4" male spade? If so, you can buy the 1/4" female spade to slide over that.
Quote:
| Another issue is that I have a small apartment without any return ducts - the bottom of the HVAC just has a filter so I was thinking of running the bypass down to that directly. Do you think that will work? |
Into the cabinet, or is the furnace sitting on a duct/box?