Quote:
Originally Posted by ecman51`  I can't say, without seeing some kind of schematic myself. I have been trying to drum one up. I do know ONE thing you do not want to happen is cause 240 volts (L1 and L2 on a diagram) to go to the motor, by mistake.  |
I found the schematic and tech sheet. It has some self tests which resulted in eliminating the motor as a problem since it ran fine during test mode. I think you got me on the right track! I can test the Even Heat Control and the timer.
Here is some more info from the Timer test INFO SHEET. Right now I'll just focus on the time dry mode.
TIME DRY MODE
Timer Contacts Timed Dry Cool Down Wrinkle Guard Off
W to BK O O O O
R TO BK X X O O
V to BK O X X O
BU to BK X X X O
CORRECT ME IF MY ASSUMPTIONS ARE WRONG:
1. In the timed dry mode I should have continuity between these terminals-R to BK.
2. I can jump these wires to bypass the timer R to BK.
Is this correct?
Thanks you have been a great help!