Set these all to 3, Auto/E is not going to work with your system.
Quote:
342 E 0
365 E 0
372 E 0
500 E 0
510 E 0
520 E 0 |
Set these to 0 (same as above on the Auto/E)
Quote:
| While I was noting these down, when I got to about 530, the light came on. When I hit Done, it flashed error 89 at me, then disappeared after a few moments. |
This is normal, I've had this happen to me in the past.
Other than that, all is wired up right.
I am not able to find a manual , but do you have the dehumidfication wired up?
Also, with the fault code, is there anything showing on the air handler's board?