| first get some 2 1/2"x10 nails and 2x8 lumber. screw 2 pieces of 2x together and mount vertically in between to i joists on the webs. place a screw every 1 1/2" or so on each block. mount the same assembly 2 joist bays over. it is from these that you will hang the bar.
the pipe should hold, i think the critical connection is the steel/wood connection. you'll have to see what home depot has in the way of hardware to make this connection. if you could find some sort of strap or bracket to put the weight on the top of the blocking that would be best. or a bracket that is bolted horizontally through the blocking would work as well. the flange you have picture would be less than ideal but may still work, this is up to you. |