Quote:
Originally Posted by DocG2828  So if I wire it that way, it'll give me my 24v from the G wire? Would I just get a new spade connector and put both wires into the same connector and back onto the G post? When would this tell the humifier to turn on, whenever the heat is on? |
G is for fan. so any time the t-stat calls for anything, G will power up to run the fan, then that will power up the humidifier.
Quote:
| I have everything installed so far except the sail switch. So this would still be possible without any patching work. |
No, you won't need the sail switch, if you already got it cut in, then go ahead and use it if you want.
Quote:
| Thanks for your help. I've read a lot of posts on here and you always seem to provide very good advice. Thanks! |
You are very welcome.. Glad to help.