View Single Post
  #7 (permalink)  
Old 10-09-08, 03:53 PM
Gunguy45's Avatar
Gunguy45 Gunguy45 is offline
Topic Moderator
 
Join Date: Dec 2007
Location: Northern AZ
Posts: 6,847
I like the DAPtex Plus window and door. Water cleanup of any mistakes. Expands, but doesn't overexpand. Stays flexible.

It does need a cleaner surface to adhere than the solvent based stuff, in my experience.

About $5 (?) a can in the paint department of most places. One can will normally do a patio door. Can't say for windows, guess it depends on the size. My can says 510 ft at a 1/4" bead size.

btw...heres my thinking. Yes, filling the whole space is good, but I don't think it makes THAT much difference. A bead of foam at the outside of the frame then a bead on the inside, should (if done well) create a dead air space. I don't think that extra 1" or so of foam will change a lot. Better to make sure your caulking is done very well. Water will do more damage than a little bit of cold air.

It's your money though...it might be more important than I think. Prob a little harder to do with a replacement window also.
__________________
Vic
I'm no expert, but don't tell my wife that.
Reply With Quote