Quote:
| I had connected black power supply to L1, connected the two reds L2 and T2 together with a cap, and then connected my black feed to the heaters to T1. I did it this way because it seemed similar to my old White-Rodgers t-stat. But it shorted out so I guess that wasn't quite right. |
I can't see why it would short out like that.. The way you wired it would been a single pole vs double pole.
Quote:
| Looking again at the wiring diagram, I'm guessing that I should have run black supply to L1, white supply to L2, and then T1 back to feed the black heater wires and T2 to feed the white heater wires. This would be a slightly different setup that I currently have. So I'm just looking to see if I have correctly understood the wiring diagram. |
That is correct, wire it that way and see what happens.