| Ideally, you will eventually want to get a copy of the installer manual (Ademco Vista-20p is what this system is a clone of). Since you are trying to change just one device, here's the basic steps:
Enter programming by keying [installer code] + 8 + 00
enter *56
it will ask "Set to confirm?" enter 0 for no (you may have to press * after entering 0).
Next it will prompt for the zone number. Enter the two-digit zone number for the device you are trying to change followed by *.
It will show a summary screen of the current settings, just press *
The next screen is the one you want. It will prompt for zone type. Enter 01 (you may need to press * to move to the next screen)
From that point on, just keep pressing * until it gives the prompt "program alpha". Enter 0* for no, and you will be back at the zone select prompt. Enter 00, then enter *99. That should change your transmitter to an entry exit zone type. __________________
"Ask the Right Question..."
- from _The Snow Queen_ by Joan D. Vinge- |